Data Sheet

Overview

Mixtile Cluster Box is a PCIe switcher that can mount up to four Mixtile Blade 3s through PCIe interfaces, which allows for multi-node computation. Comparing with a single Blade 3 board, this powerful and versatile 4-node clustering offers boosted computing performance, faster networking, and expansive storage capacity.

The switcher consists of a backplane and a control board enclosed in a customized chassis with dual cooling fans. Thanks to the ASM2824 PCIe switch chip, the quad-channel PCIe 3.0 backplane enables seamless data transmission between Blade 3 boards for robust, uninterrupted performance.

Main features

• Boosted computational performance

A 4-node cluster enhances computational capabilities, which enables you to easily tackle complex tasks, process data-intensive applications, and accelerate your workflows.

• Seamless connectivity and uninterruptible data transmission

Driven by the ASM2824 PCIe Packet Switch chip, the cutting-edge backplane ensures seamless connectivity among Blade 3s and continuous data transmission.

• Expanded storage capacity

Four NVMe M.2 slots support PCIe 3.0 x2, which are fully compatible with SSDs. You can scale out storage without compromising on storing critical data or large-scale projects.

• Compact size with efficient cooling system

A customized small chassis equipped with two internal 60 mm fans ensures that your system runs stably and smoothly in a very small format.

Technical specifications

Switch	ASMedia ASM2824, support four PCIe 3.0 4-lane ports
Storage interfaces	4x NVMe M.2 M-Key slot (PCIe 3.0 x2 each slot, connecting to Blade 3)4x SATA 3.0 port (connecting to Blade 3)
Connectivity	4x U.2 interfaces (connecting to Blade 3)
Network	1x 100/1000 Mbps Ethernet port
PCIe expansion	2x SFF-8643 port (support PCIe 3.0 x4 each, upstream)
Fan	2x 60 mm fans
Software support	Preloaded customized Linux system and Kubernetes
Power	1x DC jack port, 19~19.5 V 4.74 A power inputPower button with a blue LED indicator
Material	Metal case, SGCC steel
Dimensions	213 mm x 190 mm x 129 mm
Temperature	Operating: 0°C to 80°CStorage: -20°C to 85°C
Relative humidity	Operating: 10% to 90%Storage: 5% to 95%

Functional description

Microcontroller

MediaTek MT7620A router-on-a-chip

• Embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache
• 256 Mbytes DDR2
• 16 Mbytes SPI Flash
• Firmware: OpenWrt System

Switch

ASM2824 PCIe Packet switch

• Upstream PCIe interface
• 1-, 2-, 4-, or 8-lane PCIe® connecting with root port
• Automatic detection of lane configuration on boot-up
• Supporting transfer rate of 2.5 Gb (250 MB/s), 5 Gb (500 MB/s) per lane
• Downstream PCIe interface
• 16 lane PCIe® 3.1 interface supporting up to 12 PCIe® ports
• Support L0s/L1/L23/L3 power saving states
• Support L1 substate deep power saving mode
• Support wake up function in S3/S4
• Support port disable by individual control
• Support LTR
• Support AER
• Support SRIS on both upstream and downstream ports.
• Max Payload Size = 512 Byte
• Support hot-plug, surprise remove

Connectivity

U.2 interface

The U.2 interface employs a 68-pin U.2 connector with a standard SATA signal, a SATA 3.0 signal, a PCIe 3.0 X4 signal (four lanes PCIe 3.0), and 12 V or 19 V power output for main board.

Pin #	Pin name	Signal description	Direction	Pin type
2	SATA_TXP	SATA Transmit+	Output	SATA PHY
3	SATA_TXN	SATA Transmit-	Output	SATA PHY
5	SATA_RXN	SATA Receive-	Input	SATA PHY
6	SATA_RXP	SATA Receive+	Input	SATA PHY
8	PCIE30_PORT1_REFCLKP	PCIE3.0 Reference Clock1+	Input	PCIe PHY
9	PCIE30_PORT1_REFCLKN	PCIE3.0 Reference Clock1–	Input	PCIe PHY
11	PCIE30X4_CLKREQN	PCIE3.0 Clock Request	Bidir	Open Drain–3.3V
12	PCIE30X4_PERSTN	PCIE3.0 Reset	Bidir	Open Drain–3.3V
14	PCIE30X4_WAKEN	PCIE3.0 Wake	Input	Open Drain–3.3V
17	M.2_DET	M.2 Plug Detect	Input	Open Drain–3.3V
22	LED	LED Power	Input	Power
23	PRZ	GPIO	Bidir	CMOS–3.3V
26	19V	19V main Power	Output	Power
27	19V	19V Main Power	Output	Power
28	19V	19V Main Power	Output	Power
33	PCIE30_PORT0_TX3P	PCIe3.0 Transmit 3+	Output	PCIe PHY
34	PCIE30_PORT0_TX3N	PCIe3.0 Transmit 3–	Output	PCIe PHY
36	PCIE30_PORT0_RX3N	PCIe3.0 Receive 3–	Input	PCIe PHY
37	PCIE30_PORT0_RX3P	PCIe3.0 Receive 3+	Input	PCIe PHY
39	PCIE30_PORT0_TX2P	PCIe3.0 Transmit 2+	Output	PCIe PHY
40	PCIE30_PORT0_TX2N	PCIe3.0 Transmit 2–	Output	PCIe PHY
42	PCIE30_PORT0_RX2N	PCIe3.0 Receive 2–	Input	PCIe PHY
43	PCIE30_PORT0_RX2P	PCIe3.0 Receive 2+	Input	PCIe PHY
45	PCIE30_PORT0_TX1P	PCIe3.0 Transmit 1+	Output	PCIe PHY
46	PCIE30_PORT0_TX1N	PCIe3.0 Transmit 1–	Output	PCIe PHY
48	PCIE30_PORT0_RX1N	PCIe3.0 Receive 1–	Input	PCIe PHY
49	PCIE30_PORT0_RX1P	PCIe3.0 Receive 1+	Input	PCIe PHY
51	POWER_ON	MB Power on control GPIO	Bidir	Open Drain–3.3V
56	UART_TXD	UART Transmit	Output	CMOS–3.3V
57	UART_RXD	UART Receive	Input	CMOS–3.3V
59	RESET	MB Reset control GPIO	Bidir	Open Drain–3.3V
61	PCIE30_PORT0_TX0P	PCIe3.0 Transmit 0+	Output	PCIe PHY
62	PCIE30_PORT0_TX0N	PCIe3.0 Transmit 0–	Output	PCIe PHY
64	PCIE30_PORT0_RX0N	PCIe3.0 Receive 0–	Input	PCIe PHY
65	PCIE30_PORT0_RX0P	PCIe3.0 Receive 0+	Input	PCIe PHY
67	DPE_CLKN0	PCIE3.0 Reference Clock0+	Input	PCIe PHY
68	DPE_CLKP0	PCIE3.0 Reference Clock0–	Input	PCIe PHY

M.2 interface

The M.2 interface employs a 77-pin M.2 connector with a standard PCIE3.0 X2 signal, and for PCIE Module 3.3 V power Output. It can be used for external SSD to increase storage capacity.

Pin #	Pin name	Signal description	Direction	Pin type
3	M.2_DET	M.2 Plug Detect	Input	Open Drain–3.3V
29	M2_PCIE30_PORT0_RX1N	PCIe3.0 Receive 1–	Input	PCIe PHY
31	M2_PCIE30_PORT0_RX1P	PCIe3.0 Receive 1+	Input	PCIe PHY
35	M2_PCIE30_PORT0_TX1N	PCIe3.0 Transmit 1-	Output	PCIe PHY
37	M2_PCIE30_PORT0_TX1P	PCIe3.0 Transmit 1+	Output	PCIe PHY
41	M2_PCIE30_PORT0_RX0N	PCIe3.0 Receive 0–	Input	PCIe PHY
43	M2_PCIE30_PORT0_RX0P	PCIe3.0 Receive 0+	Input	PCIe PHY
47	M2_PCIE30_PORT0_TX0N	PCIe3.0 Transmit 0-	Output	PCIe PHY
49	M2_PCIE30_PORT0_TX0P	PCIe3.0 Transmit 0+	Output	PCIe PHY
53	PCIE30_PORT1_REFCLKN	PCIE3.0 Reference Clock1+	Input	PCIe PHY
55	PCIE30_PORT1_REFCLKP	PCIE3.0 Reference Clock1–	Input	PCIe PHY
2	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
4	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
12	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
14	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
16	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
18	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
50	PCIE30X4_PERSTn	PCIE3.0 Reset	Bidir	Open Drain–3.3V
52	PCIE30X4_CLKREQn	PCIE3.0 Clock Request	Bidir	Open Drain–3.3V
54	PCIE30X4_WAKEN	PCIE3.0 Wake	Input	Open Drain–3.3V
70	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
72	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power
74	VCC3V3_PCIE	3.3V M.2 Module Power	Output	Power

100/1000 Mbps Ethernet controller

• Support two identical Ethernet controllers
• Support 10/100 Mbps data transfer rates with the RGMII interfaces
• Support 10/100 Mbps data transfer rates with the RMII interfaces
• Support both full-duplex and half-duplex operation
• Supports IEEE 802.1Q VLAN tag detection for reception frames
• Support detection of LAN wake-up frames and AMD Magic Packet frames
• Support checking IPv4 header checksum and TCP, UDP, or ICMP checksum encapsulated in IPv4 or IPv6 datagram
• Support for TCP Segmentation Offload (TSO) and UDP Fragmentation Offload (UFO)

SATA interface

• Compatible with Serial SATA 3.3 and AHCI Revision 1.3.1
• Support eSATA
• Support 1.5 Gb/s, 3.0 Gb/s, 6.0 Gb/s
• Support 3 SATA controller

SFF-8643

• Compliant with the latest SAS 3.0 spec, and supports 12 Gb/s data transfer protocol
• Support up to 4-ports (4 lanes) of SAS data.

Pin #	Pin name	Signal description	Direction	Pin type
A1	CLK0P_8643	SFF-8643 SAS Reference Clock+	Output	PCIe PHY
A2	CLK0N_8643	SFF-8643 SAS Reference Clock-	Output	PCIe PHY
A4	UPE_RXP1	SFF-8643 SAS Receive 1+	Input	PCIe PHY
A5	UPE_RXN1	SFF-8643 SAS Receive 1-	Input	PCIe PHY
A7	UPE_RXP3	SFF-8643 SAS Receive 3+	Input	PCIe PHY
A8	UPE_RXN3	SFF-8643 SAS Receive 3-	Input	PCIe PHY
C1	USB_IN_DP	USB2.0 data+	Bidir	USB PHY
C2	USB_IN_DM	USB2.0 data-	Bidir	USB PHY
C4	UPE_TXP1	SFF-8643 SAS Transmit 1+	Output	PCIe PHY
C5	UPE_TXN1	SFF-8643 SAS Transmit 1-	Output	PCIe PHY
C7	UPE_TXP3	SFF-8643 SAS Transmit 3+	Output	PCIe PHY
C8	UPE_TXN3	SFF-8643 SAS Transmit 3-	Output	PCIe PHY
B1	8643_RESET	SFF-8643 Reset control	Bidir	Open Drain–3.3V
B2	8643_SEL	SFF-8643 SEL GPIO	Bidir	CMOS–3.3V
B4	8643_RXP0	SFF-8643 SAS Receive 0+	Input	PCIe PHY
B5	8643_RXN0	SFF-8643 SAS Receive 0-	Input	PCIe PHY
B7	UPE_RXP2	SFF-8643 SAS Receive 2+	Input	PCIe PHY
B8	UPE_RXN2	SFF-8643 SAS Receive 2-	Input	PCIe PHY
D4	8643_TXP0	SFF-8643 SAS Transmit 0+	Output	PCIe PHY
D5	8643_TXN0	SFF-8643 SAS Transmit 0-	Output	PCIe PHY
D7	UPE_TXP2	SFF-8643 SAS Transmit 2+	Output	PCIe PHY
D8	UPE_TXN2	SFF-8643 SAS Transmit 2-	Output	PCIe PHY

UART

The leading connector for system DEBUG.

Pin #	Pin Name	Signal Description	Direction	Pin Type
1	UART_RX	UART Receive	Bidir	Power
2	UART_TX	UART Transmit	Bidir	Open Drain–3.3V
3	GND	GND	Bidir	Power

Block diagram

Technical support

MIXTILE technical support team assists you with the questions you may have. Contact us with the following methods below.

• Email: support@mixtile.com
• Website: https://www.mixtile.com
• Community: https://community.mixtile.com/